Saturday, June 14, 2008

another day, another shoot

Today we shot some footage of the narrator, and his encounter with Jean Claude.

Well, I was snapping BTS pics when I could, and wound up with this one.




Now, being that I was just snapping and quickly glancing at the shots on the small LCD monitor I didn't actually catch this at the time. Since I'm a geeky fanboy sometimes as soon as I saw this after downloading the pics I just KNEW what it was going to become when I was done.






So, without further ado, I present...










The tribute poster made from the above. This was not condoned by the production, it's just a goof based on the shot I took. Kyle had his head just barely out of whack for it to be a perfect match, had he turned about an inch to his right the images would be "dead" on.


Anyway, besides that the shoot was OK. We had some storms roll through and a water issue that delayed the start a little bit. I'm uploading the shots to my site right now. Just head here and click on Jean Claude to see some more BTS stuff.

Thursday, June 5, 2008

Jean Claude The Gumming Zombie

I haven't updated much here, but over on my site I added a whole bunch of behind the scenes shots.

Where's the time go?

Well, things keep on moving along.

As promised on myspace... some test footage of an arm gag for Jean Claude.




This past weekend was a big shoot with all kinds of zombies and a few gags, including the above if I could have got it working right again. The thing worked, but I had to change a couple things to make it work for the shot, at which point it ceased working correctly. It's OK, the way we did it looks just fine and actually worked out better anyway, so I'm not too disappointed by it.

Another one of the gags involved a woman being drug off and her fingers bleeding as she scratches at the pavement. Here's the rig I whipped up for that from things on hand.



The thin, 1/16" ID, tubes run down the bottom of the fingers. An air can filled with blood was pressurized and hitting the gray button while holding it upside down would send blood shooting out onto the pavement. There was also chalk glued to the actresses' fingertips under fake nails that was supposed to look like her nails grinding away, when it ran out the blood was to flow. Well, priming the tubes blood got on the chalk and ruined that effect. Oh well, at least the blood worked.

Besides that there were bloody bod parts and lizards and zombies running all over the place. Beautiful day with sun and no rain, unlike the day I shot the arm tests where it was in the mid low high 40s. Got a few great shots, and I'm happy if the director and the rest of the crew is happy.


In other news, working on a bunch of self adhesive wounds and may have a lifecasting marathon this weekend for another project. I'll sneak a shot or two of the wound test applications for ya.

Tuesday, March 18, 2008

More on the teleprompters.

Since I'm getting quite a few hits to the teleprompter post, here's a few more pics. It was made from things I had on hand mostly. The exception being the 1/16" aluminum angle for the monitor frame.



Showing the mounting system for the shoulder rig. Carriage bolts, washers, and wing nuts. Nothing fancy or expensive.


The mount is 3" wide, 1" leg AL channel. A slot was milled into that to mount to the shoulder rig. The monitor and glass framework is all 1/16" thick 1" AL angle. It simply bolts together. The cutouts for monitor cables and controls were milled.




The bottom showing the way in mounts as well as the hole to secure the monitor via a 1/4-20 thumbscrew.


Front view

Adhesive backed Velcro was used to hold the sides in place as well as the "glass" that was some Lexan sheet I got for $1/ pound as scrap. I never measured it, but I think it's in the 1/8" ballpark.


In terms of construction it was straightforward. Measure monitor, determine cutouts for cables and controls as well as mounting position, cut and mill to size/shape. Drill holes and bolt everything together. Adjust position of glass and make the brackets. Maybe a day or two of fussing with it. I would have liked to bead blast and anodize it black personally.



The "presidential" style prompter was even easier. It involved adapting a microphone holder and was all scrap AL angle, 1/8" thick and bolts.

Monday, March 3, 2008

Torture props


I get all kinds of weird requests. This is a torture device for an independent film from 4th Floor Pictures. Another quick job. The shaft is a dowel rod. Apoxie sculpt was used for the handle, which on further review I should have painted to look like ivory or bone as I could have done some great blood stain paint job on it. The head is a piece of cast resin I turned on the lathe and milled slots for the bass wood fins which were finished with a diamond wheel in the drill press to accept the real (ground flat) razor blades. A wooden honey thingy, a cast resin copy of an air freshener cap, and a piece of leather cord complete this brutal piece.

Just add blood and screams.

Monitors and rigs and teleprompters OH MY

ZOMG!

Teleprompters? Yep, those nifty little devices for feeding the talent their lines. I just built two of them. One that uses a small 7" DVD player/monitor that mounts to a shoulder rig. A couple pics of it below as it sat on my very cluttered workbench. The heaviest part is the monitor. I would have liked to make this one a bit more adjustable, but it works so why worry too much. The first pic is essentially done, but lacking the fabric covering and sides to seal light out (and make it easier to read.) The second pic is it mounted on the shoulder rig with the sides (black foam core) in place. Fabric was added once the camera was on it.




The other is a "presidential" type that will sit on a microphone stand with a monitor on the ground. In this pic you can see the rear of the mount I whipped up out of some scrap aluminum angle I had sitting around. This one measures about 17 inches square. The protective film is still on the plastic, some scrap Lexan I had.


They're both pretty rough by my standards, but for a couple days and being made mainly out of junk I had sitting around they turned out OK in my book.

These are NOT for Jean Claude as someone asked me earlier, this is for an industrial video.

Jean Claude continues shortly


So a bit of a break here due to scheduling. Bummer, I know.

We shot some really cool stuff and Kirsten and Kris got to have all the fun.

Sunday, February 3, 2008

don't fence me in

I cranked out some foamcore fence for the next shoot the other day.


Just a few shots it'll be needed for. The foamcore was free, so no big deal.

Tuesday, January 29, 2008

Jean Claude the gumming zombie!




The first teaser trailer is out. With a mere 2 days of shooting under our belts what did you expect? Lighten up, it's a teaser.

If you;re interested, you can learn more here or here. Of course, I'll be sharing some nuggets here as well. Like these pictures.


The sculpture of jean claude's makeup, an elderly man who is unknowingly zombified while enjoying his day. A quick sculpture done in monster makers clay. Sadly, it doesn't seem they will be making it anymore. I've grown to love it, soft when you want it soft, hard when you need it hard. I wish I would have grabbed more.

Day two of shooting. Jean claude is ready for his scenes.


Nummy nummy. I monitor the monitor as our pathetic French zombie is fed people food by mother.


Here's a few shots of some of the real behind the scenes stuff that went into making jc come alive...or would that be come undead?

A freshly demolded casting of jc's makeup. Cast in monster makers foam, with some GM flow enhancer added in to help out. The foam's somewhere in the 6 1/2-7 volume in a small sunbeam bowl, so very soft. Most of it is under 1/4" thick, but the jowls, chin, nose, and front of the neck is thicker, at the thickest it's about 1/2" A couple of drops of blue pigment added. It's a comedy, he's a zombie. Deal with it.

The mold for the makeup. Originally I had intended to run a cowl for him as well. I didn't set out to do a silicone mold for this, it just happened that I had to. The mold itself is brushed on dragon skin from smooth-on and is fairly thin. The support shell is ultracal 30. I ran into a few undercuts that I hadn't corrected due to the initial cowl idea...time demanded I get it done and run. Running the foam latex in the silicone hasn't proven to be too difficult. Baking in an old holding oven that requires constant attention to prevent the temperature running away is a bit of a pain. Every 10-15 minutes I have to manually adjust the temperature, for about 6 1/2 hours. No steaming yet, and the oven temperature is being held at about 150 degrees. The only other thing I have to be careful about is watching the edges, the silicone still wants to give just a little bit, so pushing that lifecast in well is critical for good blending edges.

I was a bit nervous about the foam, so the silicone could have ran some gelatin appliances if needed with ease. I'd also be willing to bet I could still get a nice silicone appliance out of this mold. I've run some compatibility tests with dragon skin and after the doom and gloom and dire warnings people have given me about platinum silicone and sulfur I was worried, but experimentation shows it to be very possible with a little cleaning before hand.

jc's "teeth." Don Bumgarner whipped them up for me quickly as he's my go-to for anything dental. I stained them a little bit, but would have liked to do them much darker.

I've got some props to build, and other things to work on. As I get the OK I'll be sure to post more on this.

Monday, January 21, 2008

James and the Giant Peach.

About a year ago I had made 3 masks of the farmers from The Fantastic Mr. Fox for Signstage on tour. This year the play will be James and the Giant Peach and I got an email asking for more masks. Excellent. They wanted 6 masks initially, the rhino was added along the way along with a giant "spanking hand." One of the aunts will chase James with the giant hand, about 4 times the size of a normal hand during the play.

Shown here are some of the things that went into making the heads and working out the final designs.

The maquettes of the grasshopper, spider, and worm. Thrown together quickly to show where I was headed with the sketches I had done. They've got some lines carved in that approximated what I saw as the pattern pieces for the foam masks.

The shark and rhino.

The cloudmen. You can click on any of the above for a larger view.

The final masks were created in sheet foam. RIT dye was used to color the foam and some airbrushing of details. Hard hat suspensions were used and will allow adjustment for the actors. You can view them in the sample puppet gallery on my website.

Once again the job was a fun time, and a welcomed change from the usual things I get involved with. No zombies. No extremely dangerous chemicals. Just a bit of contact cement fumes and scalding water with the dye.

Sorry there aren't any horror stories of things gone wrong. The worst thing that I ran into on this was sticking a T pin into my knuckle, painful at first, but it faded quickly.


Monday, January 7, 2008

Been a while

So to catch up...Merry Christmas, happy new year and all that.

Busy working on some foam heads for a play. Similar to the last batch, actually, for the same people. It's been almost a year now since I made any. Now that I think about it, those were the reason I started this blog, specifically to thank the few people and blogs who pointed me in the right direction. Well, the thanks still hold up. I wish I had gotten a little more practice at this kind of thing over the past year, but I haven't. In fact, besides those and the little bit of foam work I did for Near West recently I haven't touched any sheet foam this year.

I'm not sure what I can or can't say right now, so I won't say much. There are 7 characters in progress, just under a week until they're needed to leave on the tour. Cutting it close again, not that there's anything really new about that. I'll have some pictures of them when they're all done and I get an OK to post them.

Beyond these heads lurks some zombie work. Due to a few things here and there it will be a big rush to turn a young man old and then to zombify him through a few phases for a short film. I'll get yet another tiny part in this as well, and I can say I'm not a homeless person. Always good to stay away from typecasting.

More in the near future, and I hope to keep this blog updated a bit more frequently.

Sunday, November 18, 2007

Near West Theatre

Been working. Workin' my tail off actually. That itself seems a bit unusual for this time of year, but not unwelcome. The past two weeks have been spent pouring time and energy into Near West Theatre's production of Disney's Beauty and the Beast. I was asked just over two weeks to help out on costumes and I figured it couldn't be that bad. I accepted and have been making all kinds of foam stuff since then as well as helping out wherever I could.

As usual, I'm not going to BS you, the 2 or 3 people who stumble upon this. It was pretty damn hellish, but that's work in general. You're trading your life, your time here on this planet and your energy to make something, in the case of theater, something that only has to last as long as the run of the show. Movies are the same way, if it's held together by bubblegum and a prayer it doesn't matter as long as they get the shot. Well, I had all kinds of foam things to make, mostly "second string" objects and foam headpieces that represent the enchanted castle objects... salt and pepper shakers, feather duster handles, desserts, a pork chop, bleu cheese, a creamer, a sugar bowl, tree heads, and even tree branches.

If it weren't for the cast and most of the staff I would write theater off entirely. The cast was wonderful to work with, and they had me choked up when they were thanking me. I guess I'm just a big softy or something, but if any of them read this, thank YOU. You made it worthwhile.

And lest I forget, big thanks to Audra for coming down and helping out a bit too.

Friday, October 12, 2007

Bucky Katt takes shape thanks to Blender.


Blender. You've heard of it right?

I downloaded it years ago. I HATED it...the interface, the lack of help besides the mostly non-English speaking message boards at the time, well, that's all changed.

Now I'm starting to love it. With things like the many blender blogs, boards, and video tutorials that have popped up, as well as the commercially available books it doesn't make me want to pull my eyes out with a pickle fork.

So, without too much trouble I've gotten some of the basics of getting around and modeling in blender. This is the first organic modeling I've done, so it's a bit rough still and is a work in progress. It's really just a learning exercise on how to model things in there, and will be rigged and set up for animation at some point.


He is of course, Bucky Katt from Get Fuzzy.

It'll be a while until I can get him all set. Did I mention I'll probably upload the .blend file for him once he's all set?

In the mean time I'll be attempting to get good enough with Blender to pull off some of the CGI elements for a new short film I'm working on. It requires a fly crawling up a nose and a few other shots that probably are best to do CGI, at least on the budget we've got to work with.

Check back for more later.


Wednesday, August 29, 2007

In other news...

Production crawls forward on Calamity House's Green Lantern: New Dawn. At this point I'm holding things up with some CGI shots.

Now that the goggles are off the plate, this kicks into high gear at the end of the week, or sooner. I just need a day or two to take care of a couple things, and get outside to the metroparks for some air and screwing around. It's been a long year so far and I fully intend to enjoy at least one summer day in semi-real nature.

Working on a few shots that I probably can't talk about just yet, so I won't beyond saying that there's a few geek things in there that I'm happy about after this summer's movie season. They did a pretty good job shooting it and making life for a semi-new to CGI a bit less hellish. Either that or I can pull stuff out of my no-no spot fairly well. I'd like to think it was them, because the thought of magically removing things from any of my orifices is rather disturbing.

Once I get an OK I'll post a few shots of the work over here first, the one reader who stops in deserves a scoop.

So, since I can't update my website....

For some unknown and elusive reason I haven't able to update my website in the last few days, and things that I had uploaded before that are returning a 404. Most of the site's still there and operating.
Been a while since I posted anything here, mostly due to work. Been working on a few projects, the first being construction of some suits of armor for a movie. Took a lot longer then I expected and there were a few hiccups along the way, the main one being that I had to cast everything myself. 6 suits of armor, each composed of at least 25 parts, plus 4 piece guns. Fiberglass. Not fun. Also, a few of the parts had to be reworked, remolded, and recast. I'd rather not talk about it anymore right now.

After that a few things turned up. A set of Sam Fisher's goggles from Splinter Cell. These were a joy compared to the armor. The armor wasn't bad by itself, or if I'd have had some help. It was a learning experience, and the biggest thing I learned is not to touch anything like that for at least 4 times the money, and even then I had better be damn sure I have a working, large, vacuformer with a pile of precut plastic. Ok, back on track. The goggles. They don't do nothing, at least in this case. Built as a private commission they had to work, as in light up. I've seen some of the other designs out there that use LEDs. Not a fan myself, at least of the LEDs for that use. Very intense light reflecting off a lens into darkened tunnel-vision eyesight wandering around, usually at a crowded convention. No thanks. So I got to testing ideas for different means of illuminating them. Prism, nope. Different angle on the LEDs, nope. Polarized filter, nope. I tried a few other things. Nothing was giving me quite what I wanted.

A while back, a local discount/closeout store, Marc's, had those EL nightlights on sale for 2 or 3 for a dollar and Mr. FX that I am grabbed some since I have worked with EL wire before. Ok, worked isn't an accurate description, I have played with and wanted to work with it for a few things. So I pulled out my being seen inverter that I had cut the wire off of and a couple nightlight. Pulled those apart, carefully so as not to destroy the nice small "screen" looking piece that may prove handy for a future prop. I wrapped it into a tube and lit it. A nice glowing effect, especially if viewed from an angle. I put a plastic lens I had here (from the armor) into the tube and I could still see. Hmm, this might work. I had a safety vest from my days at Drifter, that had probably been there a good 10 years that had a thin, much more flexible, and most importantly, green EL strip about 1/2" wide sewn into it. Well, yanked that out and into the tube it went. GREAT!

I'd got the green glow, and most importantly the needed vision. Now it's just time to start building the things. Out came the handy box of left over resin castings. I know I had some of my resin-cast-for-machining-blanks in there. I had made a mold of a few different size PVC pipes that I could pour excess resin into and use those as fodder for the lathe if needed. Well, I turned a few tubes, bored them out with a lip for the lens and a cable routing hole to run the wire through. I also turned a center tube, which wasn't quite up to snuff, so back to the lathe I went and turned another that was much better. The plan was to house the EL inverter, batteries, and much of the cable in the center tube. In the end that worked out just fine, but there were a few tool wielding primates along the journey eager to lend a hand.

So, that's the end of the easy part. My weakness lay ahead, sculpting something symmetrically. Using the infrequently, perhaps twice in a pinch, old style monster makers full head armature I set to work. Thoughts of making a "plate" to mount the tubes on to ensure symmetry, placement, and things like that quickly ended when it became painfully apparent that the goggles were going to be at least 10" off the face going that route. Oh well, off it came with quite a bit of clay. The tubes got slammed into the clay, and things started looking better. So they weren't perfect. They were close enough. Sculpting away I did all the tricks to gain some semblance of symmetry.

Molding came to mind. The tubes I had initially turned, and the initial plan called for a flexible material with the cast resin tubes embedded into it. The tubes had been given a groove around the base to allow them to be held onto by dragon skin, which was the material of choice. Well, that went up in smoke since the plan had changed. OK, I thought. I'll just do a two piece silicone mold, laying some clay in to ensure an even wall thickness. Nope, I had been working off some less then ideal reference photos that I hadn't boosted the contrast enough on to see the large "V" cutouts on the sides. There's no way silicone that thin would have held it's shape. My mind wanders back to the "plate" idea slightly modified. A semi rigid box that would support the tubes, allow the straps to be attached without distorting the silicone under the weight. No, that'd require too much removal of clay to get back to that shape, and time's running out. Not enough time to do that after the mold's done and get it to fit.

Onward I march.

So now, I've scrapped my initial plan in favor of a "wing it" attitude trying to stay a step or two in front of those primates who I swear I could hear grunting as they heaved their plumbing tools. I'll get the sculpture done, and I guess I'll stick with the two part mold plan. I'll just get something else to cast it out of, something stiffer. Tick. Tick. Tick. CRAP! the clock's going to get me. Get your damn dirty paws off of me! "Or was it From my cold dead hands?" In any case they've got me in their grubby grasp.

So emails back and forth most of this time. The decision comes to just cast them in resin. I REALLY hate, I mean HATE, like even in real life I'm screaming to myself I HATE IT when I disappoint or can't make a deadline or deliver what I said I can. The monkeys begin their funny-if-you're-looking-on-and-not-the-target flailing assault. I agree to the resin, with every intention of casting one, then working out the bugs in time to cast another better one out of something else. So I set out to mold it. The primates plans realized. I make mistake after mistake, some my simple oversight, some truly unforeseen events. Molding takes a bit longer, and uses up valuable materials that fate would leave me throwing clenched first to the air and cursing my shortsightedness over later. The first part of the mold is finally done. Fingers are crossed. Mine that it has come out well, the short hairy ones that they're succeeded finally. Chimps be damned.
The results were a draw. I had mostly outsmarted them, through my own experience or dumb luck, but they had won one major victory. Since the center tube is stepped down at the lens end, and I was making a brush up glove mold, I had tried to keep the silicone thin and even inside the narrow, slightly deep tube while getting enough thickness built up. Imagine a squid's body inside an old coke bottle. You could simply squeeze it out the opening. Well, the silicone had pooled off the walls enough to make a nice solid plug inside the tube. Grandfather time sides with the monkeys and I have to carry on. I'll get a shot or two if this tears I'm going to have trouble, so I carefully cut the original tube out of the mold to avoid any chance of tearing it at this point. Quite a challenge with only two hands. Like wrestling with an anaconda? Have they recruited MORE help? Sneaky cheeky monkeys. Eventually I beat them at this newest game and got it out. Fine, now let's make the second part, the clay just will NOT stay in place, I still haven't figured out why. Perhaps feces flung at the mold? No, I'd have seen that. DAMN, that incessant ticking is getting old. It's not like there isn't a clock two feet in front of my face.

I decide to simply cast the tubes and coat the mold with a very thin, even coat of resin I can just build it up with the shell shock. I've easily got enough for two castings just in case. WRONG. I used most of it for the support shell instead of the dreaded fiberglass (did someone say armor?) Well, now I have to be extra careful and cautious. I made it, with just enough, or just an ounce or so under what would have been ideal. Now, the moment of truth, can I get this out without breaking it, or tearing the mold.... Away I pry, carefully, with compressed air, water, and some blood due to a sharp jagged edge newly created by me snapping a piece of leaked resin off when the wet springy mold got away from me. Pictures get sent out now. I have response. Yes, I'm well aware of those things and will be taking care of them. I do, more pictures. The reply would make it all worth it. I proceed to finish the face piece while attempting another casting in different materials. It doesn't fare as well as the resin cast did. Air bubbles, trouble here, trouble there. Now I fling the feces to the garbage not to be mocked by monkey luck. It'll be resin, that's all. As I trim I really wish I had doe the shell in another material as a few spots look dangerously thin to me. Break out the apoxie sculpt from it's position next to the duct tape in the fix-it toolbox. Build up a couple areas, add a more pronounced "lip" around the edge to glue some foamie padding to so it's a bit more comfortable. Prime, paint, ready to assemble the electronics and get this out.

Now Cornelius, Cheetah, Lancelot Link, and Curious George make their last stand. They put up a hellova good fight too.

The holder/ battery box was a simple item to whip up, I had made the center tube the size it is so I could save a bit of time here and just trim to length, mill and slot a resin blank to handle this. I was able to whip that up lickety split. Crap, I need contacts for the batteries. To the junk boxes! Hmmm, nothing much in the way to contacts that'll work out of the box here. I have a bag of assorted copper clad board material I bought a while ago in the electronics drawers. That'll serve as the negative (bottom) contact here. Did I mention the size limitations and use of cheap button cells? CR 2450s since Pat Catans carries them for use in some of their LED tea lights and a 4 pack runs $1.89 and tax. I had bought some CR2032 holders on the off chance that I'd use them for the availability factor, but looking into it, they probably wouldn't have enough oomph. To the OTHER junk box. Here's where the packrat, get it while you can and find a use later mentality paid off. Some years ago while working stock at a local drug store I had the opportunity to take many displays. One of them was a cosmetic unit that had spring steel coils, like you'd find in a tape measure, to push the product forward. Many years later I had broken the bulk of the plastic display but decide to pull those out and toss into the box for future use. Looking at the 2032 holders, they were essentially close enough for my taste. Quickly cutting off a length I attempted to solder a wire onto it. No go. scuffing it with the dremmel proved to have no effect. Well, I was already paddle-less and upstream where the EL strips came in. Days earlier I had tested with success means for connecting wires to the trimmed strips. Today that method just was not working. I couldn't solder to them for fear of melting the lamination sealing the AC in. I had looked locally for conductive copper tape with no luck. I remembered something I saw online, perhaps on make or instructables. Conductive glue. Maybe I saw it in a store, I honestly don't remember, nor does it matter. Time for some mad scientist type experimentation. Superglue sounded like an idea candidate for the base, and the 2 pounds of aluminum powder I use to dust my molds before casting was within reach. It's aluminum after all. Metals conduct electricity. So, a little powder in the glue, mix, apply to the EL strip and let dry. Now, the moment of truth. Hold the wires from the EL inverter to the hard blobs and hope for the best. Monkeys 1, me 2. It worked like a champ, and what's better I tried to pry it loose and it held fairly well, in fact when it finally did pull loose it took the conductor right off the EL strip. So it worked there, so the next test was connecting it to the stainless spring I'd fashioned from the display part. No problem there either.



With those minor issues worked out I could proceed to disassembling the inverter I had bought for this so I could mount it into the battery/electronics holder. I had to remove the switch since it would be inaccessible when mounted and there had to be an easy way to turn the on and off. Chim Chim has a large lead on third. I managed to get the switch off, but somewhere along the lines of wiring the new one I totally screw up the board overheating it trying to determine which set of the 10 pins of the switch I need to connect to. He steals home to tie the game. The bastard! Actually, I'm not quite sure if that's where I went wrong or if I toasted one of the many SMD resistors. Fine, I've got another. I can still make it. I've got a day left to assemble this, a few wires, some heat shrink, a few hours tops.

King Kong steps up to bat and knocks one out of the park with two outs, two strikes in the ninth. I melt a couple of the copper traces off of this inverter. TIMEOUT COACH! What now? I have to have these out tomorrow at the absolute latest, and even then I'm betting on UPS not screwing me. The fine folks at HobbyTown USA to the rescue. But it's not quite that simple. An accident in front of their driveway, every elderly woman who stereotypically couldn't see over the wheel was on the road and letting the fast and furious types cut into traffic. All this over a sunfire with the hood tacoed up after driving into the rudder of a trailered sailboat. I swear to God. Feces flying in every direction.

God, I should have just got this in the first place weeks ago.. They had one, 1, uno, singular of Miller Engineering's experimenter's kits on their shelf. I will now be buying several more for the simple fact that it saved my bacon. It was meant to use with EL cable, but from the appearance of the kits on their website will also drive about 6 square inch EL panel, so it should be fine for the 4.something square inches of the EL strip I'm using in these goggles. They could have the worst customer service in the world, but compared to a few other places I tried to contact about their products, they'd STILL be better because they sold a product that worked. Just a quick aside to EL companies with slick websites and online stores. If your store software doesn't work with IE or firefox, or is down, REMOVE THE LINK. If something else is up, please make an update to your website, even if you have to hire someone to do it for you. Please don't say you answer ALL emails within 24 hours. Now, back to our story. So, the miller kit comes wired for 2 AAA batteries. That got snipped. Thin wires lead to the EL cable socket. They were plenty long too, so they got snipped, the thing wired up beautifully. In fact, at this point it was just like I had anticipated the electronics would go together. The homebrewed conductive glue worked fine.



The last step, to apply the mirrored window film applied to acrylic lenses and install them. Ah, grape ape hits deep fly ball and the crowd gasps thinking the end is in sight for the home team. The package says not to apply the film to acrylic or Plexiglas. The man working the window and door section at a big orange home center thinks it should be fine. The film's website explains it. Difference in expansion and contraction due to heating of the plastic and glass can cause the film to bubble and peel. Hmmm, these are small areas. Small areas on a sealed black plastic mask worn close to the body. The catcher gives the sign. Screw it, I shake it off and decide to go forward. A little extra film and a few extra lenses go into the box along with the finished goggles, extra batteries, cast strap, as grape ape's fly ball is caught.

57 dollars for next day shipping later the finished goggles are on their way out via UPS. The tracking page indicates they're on their way...to Illinois? Is the umpire trying to rule that an infield homerun? They're headed the opposite direction.

I'm waiting on the ruling from the umps now.






















No monkeys were harmed in the composition of this post, but man would I like to take a tire iron the those meddling monkeys.

Monday, July 16, 2007

lolcats

In honor of the many hours (at least) spent laughing at the feline grammar and poses captured for eternity I present these offerings. For many more that are probably better see I can has cheezeburger?

Yes, I'm also very well aware of the incorrect font and accurate spelling that Wallace Trump used. I can't find what I did with the source file so I can't redo it right now.


Wednesday, July 4, 2007

RIP Boots Randolph


Dead at the age of 80, the legendary sax player Boots Randolph, whom I never met. I mention his passing because I have (very loose) ties to the family and wish to extend my prayers and sadness of his passing.

Sunday, May 20, 2007

Congratulations to Natural Bridges

Those with their hands elbow deep in the Natural Bridges puppets have had a fun time recently. For the month of April they toured Europe thanks to Armed Forces Entertainment. For some further info peep this.


I've done some work for them over the years, so here's some free publicity...now if they'd just get me some pictures to put up here.

FANBOY!


So, finally something I worked on makes it to the big screen. Damn, that's not true, a few things have now. Oh well.

Anyway, Fanboy's available to buy now. Comic geeks and lovers of romantic comedies will like it. Independent movie lovers will too. Who the hell am I kidding, everyone will like it. It's good. The acting's good, especially for the first timers, the dialogue is fine- not too much, not to little. Normally I don't dig romantic comedies as they make me hate my pathetic life even more, but this one's good. I guess it must be the comic and comedic elements and seeing so much of myself in various characters. Probably other things too, (like Nancy Fletcher) but that's what I really dug about it.




Fanboy links on the web:

www.FanboyTheMovie.com
Calamity House
the Calamity House myspace page

Friday, April 13, 2007

hot damn!

A movie I played a very very small role in will be in a theater, soon. 
 
Big props to the folks at Calamity House Productions.  May 6th I'll be taking time out from my schedule to go check it out.  I haven't seen much of it, actually, I've only seen the trailer, which of course you can see on their site.
 
I can't wait to report back.